TACKLIFE Stud Finder, Wall Scanner 3 in 1 Metal, Wood Wall Detector - DMS03

TACKLIFE DMS03-Multifunctional digital display wall detector, with 4 modes for detection, which greatly broadens your detection range and is more efficient and convenient.

Function description

Four scanning modes: There are stud detectors to detect ferrous metals and colored metals. Metal detection, live AC line mode. Can provide you with sufficient convenience.

LCD liquid crystal display: allows you to see the data more clearly and choose 4 modes in a dark working environment.

3 signal lights: It can display four scanning modes, detection depth, detection signal strength, battery and audio signal indications, and edge indications.

Automatic calibration: No manual calibration is required, DMS03 has an automatic calibration function, and it will sound out when the stud and alternating current are detected, which improves your work efficiency.

Perfect LED appearance design: DMS03 adopts an ergonomic design, which will make you more comfortable when using it to work and improve your use feeling.

• FOUR SCANNING MODE FOR DEEPER DETECT - The stud finder is located in the center of wood studs in exact mode and deep mode up to 0.75 inches 20mm deep and 1.5 inches 38 mm deeper separately. Detecting the ferrous metal up to 4 inches 100mm and non-ferrous metals behind walls up 3.15 inches 80mm. Live AC wire mode locate live AC wires up to 2 inches 50mm deeper.
• LARGER LCD SCREEN WITH THREE SIGNAL LIGHTS - The detector has a large LCD display which could show four scan mode, detection depth, detection signal strength, battery, and audio signal indicator as well as the edges indicator, etc. The light show green when the detector was calibrated and get ready, as getting close to the center of the stud, the indicator will turn yellow to red.
• AUTOMATIC CALIBRATION & AUDIBLE WARNING - The wall detector could calibrate automatically, no need to press the button manually all the time, which was finished in the condition without nails, AC wires, or metal. The multi-function wall detector finders will provide an audio tone sound continually when the stud or AC wire is locating, saving your time and money.
• UPGRADED AND ERGONOMIC DESIGN - The TACKLIFE stud finder takes with upgraded and ergonomic design, which is so comfortable to hold from any angle satisfying your DIY and home projects. The cotton on the back has prevented the damage caused to the wall, safely and conveniently.

• Working time: 6 hours
• Battery: 9V dry battery
• Working frequency: 6.6 kHz
• Detection depth: 80mm

• 1 x TACKLIFE DMS03 detector
• 1 x User manual
• 1 x 9V battery
• 1 x Packing bag
• 1 x Warranty card 24 Month Warranty.